DUROCK STUCCO PLUS FOR SHEATHING SUBSTRATES
Stucco Plus incorporates a polymer-enhanced, fibre-reinforced base coat for superior adhesive and cohesive strength, as well as a polymer-based finish which is available in a variety of textures and infinite colours. The stucco base coat is supported by and reinforced with mechanically attached metal lath. Please refer to the system specification and appropriate details for further information.
DOWNLOAD DOCUMENTS – SPEC – 3D ILLUSTRATIONS– 2D DETAIL– AUTOCAD
DUROCK STUCCO PLUS RS RAINSCREEN SYSTEM
Stucco Plus RS is Stucco Plus with a rainscreen. The rainscreen incorporates a drained air space that separates the cladding system from the supporting construction. The Stucco Plus RS details illustrate a drained air space created through the use of wood strapping. Please refer to the system specification and appropriate details for further information.
DOWNLOAD DOCUMENTS – SPEC – 3D ILLUSTRATIONS– 2D DETAIL– AUTOCAD
DUROCK STUCCO PLUS FOR MASS WALL SUBSTRATES
Stucco Plus does not require metal lath when installed over concrete or masonry provided the surface is clean, dry, and free of any material such as paint, wax, or oil that may inhibit adhesion, and provided the substrate is conditioned with DuROCK Jewel Stone Primer prior to application of the base coat. Please refer to the system specification and appropriate details for further information.
DOWNLOAD DOCUMENTS – SPEC – 3D ILLUSTRATIONS– 2D DETAIL– AUTOCAD
EXTERIOR WALL SYSTEMS
> PUCCS
> InsulROCK
> Stucco Plus
> DEFS
> Maintenance Guide
EIFS & STUCCO PRODUCTS
> Barrier Coats
> Leveling Coats
> Base Coats
> Woodpecker Products
> Components
> Finishes
> Specialty Finishes